HomeToolsSerial Prefix Decoder Hub
OEM Prefix & Physical Stamping Database

Excavator Serial Prefix Decoder

Cross-reference equipment PIN prefixes to identify the model family, production era range, assembly plant, and likely engine configuration across 13 global manufacturers.

Technical Note: Serial prefixes indicate generation & production era ranges. Exact single-year verification requires matching full numeric sequences.

Select Manufacturer

13 Supported Brands
Caterpillar logo

Caterpillar

26 Prefix Rules

Location: Right-hand front exterior of the upper superstructure frame, adjacent to the boom foot mounting pin and hydraulic tank access.

Komatsu logo

Komatsu

10 Prefix Rules

Location: Right-hand side of the machine frame, adjacent to the boom foot mounting pin and swing motor compartment.

Kubota logo

Kubota

8 Prefix Rules

Location: Right-hand front lower chassis panel, directly below the operator station cab or canopy entry step.

Hitachi logo

Hitachi

8 Prefix Rules

Location: Right-hand side of the front revolving frame, right below the boom foot mounting bracket.

Volvo logo

Volvo

5 Prefix Rules

Location: Mounted on the exterior right side of the superstructure directly below the boom mounting bracket, near the hydraulic compartment.

John Deere logo

John Deere

6 Prefix Rules

Location: 17-character PIN plate located on the right front side of the upper superstructure frame, below the boom hinge pin.

Bobcat logo

Bobcat

4 Prefix Rules

Location: Riveted serial plate located on the right exterior side of the mainframe, directly behind the boom swing casting.

Takeuchi logo

Takeuchi

10 Prefix Rules

Location: Positioned on the right front corner of the upper revolving structure, adjacent to the boom pivot cylinder mount.

Kobelco logo

Kobelco

8 Prefix Rules

Location: Located on the right-hand front lower chassis plate near the hydraulic pump compartment access door.

Case logo

Case

8 Prefix Rules

Location: Affixed to the right-hand front exterior revolving frame below the boom swing bracket, or on the lower cab support column.

Sany logo

Sany

8 Prefix Rules

Location: Mounted on the right-hand side of the turntable frame beneath the boom pivot, or on the front right tool box panel.

Gehl logo

Gehl

6 Prefix Rules

Location: Affixed to the right-hand side of the main frame near the boom pivot assembly.

Yanmar logo

Yanmar

6 Prefix Rules

Location: Located on the right front side of the revolving superstructure below the boom pivot pin.

Inspection Anatomy

Universal Excavator Serial Plate Anatomy Guide

Regardless of brand, heavy equipment manufacturers adhere to strict industrial stamping conventions. When verifying equipment identity in the field, systematically inspect these four zones:

1

Right Front Superstructure (Near Boom Pivot)

The primary aluminum PIN plate on 90%+ of hydraulic excavators is riveted to the exterior right front wall of the revolving frame, directly below the boom hinge pin and hydraulic manifold access.

2

Chassis Steel Stamped Code (Frame Direct)

Factory counterfeit deterrent: The machine sequence is cold-stamped directly into the structural steel chassis (often 10mm to 15mm deep) near the right front carbody beam or swing tower casting.

3

In-Cabin Operator Certification Plate

Inside the cab, check the ROPS/FOPS rollover safety certification plate affixed to the rear A-pillar, seat support base, or lower right joystick console panel.

4

Auxiliary Diesel Engine Data Tag

Mounted directly onto the diesel engine rocker valve cover or engine block. Cross-reference the engine serial number to confirm the power unit aligns with OEM factory specifications.

Buyer Protocol

Used Excavator VIN Due-Diligence Checklist

Before transferring funds or signing equipment bills of sale, execute these 3 verification steps to protect against cloned or stolen machinery:

A

Step 1: Plate Rivet Integrity

OEM factory identification plates use specialized dome-head drive screws or solid aluminum rivets. If the serial plate is secured with common aftermarket pop-rivets or shows signs of pry marks, treat it with caution.

B

Step 2: Stamped Steel Match

Locate the cold-stamped characters etched directly into the heavy chassis frame. Every single digit must match the riveted data plate 100%. Check that the steel surrounding the stamp hasn't been ground or re-welded.

C

Step 3: Dealer Telematics Cross-Reference

Contact an authorized local brand dealer and provide the complete serial sequence. Dealers can verify whether the unit has outstanding liens, warranty claims, active theft reports, or odometer discrepancies.

FAQ

Frequently Asked Questions: Serial Decoding

Q: How do I find the serial number on an excavator?

On most hydraulic excavators, the primary Product Identification Number (PIN) is stamped on a riveted metal plate mounted on the right front exterior of the upper revolving structure, adjacent to the boom foot mounting pin. Additionally, modern excavators have the identical alphanumeric code stamped directly into the solid steel chassis frame.

Q: What is the difference between an excavator PIN and a Serial Number?

Under modern ISO 10261 standards, heavy construction machinery utilizes a 17-character Product Identification Number (PIN), analogous to an automotive VIN. Characters 1–3 represent the World Manufacturer Code (WMC), characters 4–8 designate machine family and configuration, and characters 10–17 denote the manufacturing year code and individual unit serial sequence.

Q: Can I determine the exact manufacturing year solely from the serial prefix?

Serial prefixes (such as Cat 8LK or Komatsu PC200-8) identify the product family, engineering generation, and production era range (e.g., 2012–2018). Determining the exact calendar assembly day/year requires matching the remaining sequential numbers against official OEM dealer databases or factory build sheets.